Here is a picture of the Seacast as it appears when the bucket is first opened. The mixture is separated and in need of a good mixing.
Here it is mixed to an even consistency. This took about 2 minutes using my drill with the mixer.
Here is the Seacast mixed with the hardener.
I unfortunately did not get any pics of the Seacast after adding the fibers and mixing. Each stage of mixing took between 3-5 minutes and by the time I put my drill down after mixing the fibers, it was smoking. It literally looked like my drill was on fire. Thankfully, it finished the job and as far as I know, my drill still works just fine. You can get an idea of what the finished mixed product looks like in this image. That was all that remained when I completed my pour. Not much waste at all, great job by the people over at Seacast.
Cost Sheet | Page 1 | Page 2 | Page 3 | Page 4 | Page 5 | Page 6 | Page 7 | Page 8 | Page 9 | Page 10
Have a question or comment? Please let me know on the
comments
page.
Check out more images in the gallery.